TopeLeave about Dec 1

Interior, 3D

floor planlayout

Plain boxes, to scale, straight off the floor plan. Drag to orbit, scroll or pinch to zoom, right-drag or two fingers to pan. Walls between you and the room fade out. Tap anything for what it is and how its height is known. Heights nobody has taped are estimates, listed below; tick "show estimates" to see them.

This view needs WebGL, which this browser has turned off. The floor plan shows the same layout.
Bed
Tap something in the model

Heights that are estimates

Footprints come from the floor plan and carry its provenance. These are the heights this view had to guess to stand things up. Send a tape reading for any of them and it redraws.

whatdrawn at, inchesbasis
Ceiling76 1/4 flat, curving to 70 1/2 at the cabmeasured in the bath only; assumed the full length
Counter top36assumed, D1 on the measure sheet
Upper cabinets63 7/8 to the ceilingon top of the 27 7/8 window panel, which bears on the counter; D2
Bench top20 1/220 clear under the lid, taped 07-27, plus the lid; D3
Cushions4 thickassumed, foam not chosen
Lounge window sill39bench box top, lid excluded, plus the taped 19 1/4
Lounge window height20assumed, E6
Kitchen window43 to 58panel margins measured, counter height assumed; D9
Wardrobe72the bath door assembly is built to match it
Entry door72 tallassumed, E1
Cab pass-through24 to 63 1/839 tall raw is taped; the sill height is assumed, E4
Bed downplatform on the benches at 20 1/2assumed, D4
Bed upunderside at 65 1/4assumed, D5
Garage shelves30 and 52assumed, D6 and D7
Chest fridge18 5/8 tallDometic figure from memory, not in the repo