Kitchen door mockup
The door, its frame, the infill above and the laundry flap, drawn onto your photo of the opening from the kitchen, at the plan's sizes.
- 1Infill to the ceiling1/2 ply, about 20 3/4 x 4 1/4, finished like the wall
- 2Head, top at 72poplar 1x2, about 20 long, microcement over
- 3Hinge uprightpoplar 1x2, 72 tall, microcement over. The hinge is on its shower side, so you don't see it from here
- 4Strike jambpoplar, microcement over; the door is flush with it, a 1/8 dark gap between
- 5Apronpoplar 1x4 on the kitchen side, in front of the curb, microcement over
- 6Laundry flapdrops down on a piano hinge along its bottom; a row of vent slots; two push latches
- 7Kitchen door, D112 mm Baltic birch, microcement both faces, 18 x 67, opens into the shower
- 8Latch handleone latch at 38 in, worked from both sides
- 9D2 infillone piece of 3/4 ply, the doorway's driver edge; wedi and microcement over
- 10D2 trackabove the hole, on a bracket into the cab plywood
- 11Sliding door, D23/4 okoume, 20 11/16 wide, shut over the 19 3/4 in opening
- Door open shows the finished shower through the doorway: microcement walls, the D2 frame on the cab wall and the sliding door shut over the passthrough.
- From the kitchen you see one microcement plane: the frame and the door's face flush, a 1/8 dark gap between, and one latch handle. The catch is a lip on the door's shower face; the gasket and the hinge are on the shower side. Every part in 3D: the kitchen door in 3D.
- Sizes come from the plan (steps 10 to 13). The perspective is fitted to the opening's corners in the photo, so expect an inch or so of drift at the edges.