| Stock | For | Size | Qty |
|---|
| 3/4 plywood (18 mm) | lower wall ribs and plate, D2 infill and fill strip, box back, ceiling ribs | part of a 4 x 8 | 1 sheet, shared |
| 1/2 plywood | box tops, laundry panel | 30 5/16 x 2 + 20 1/16 x 2 3/4 + 20 3/8 x 4 1/8 | offcuts |
| 2x4 | box blocks, ripped to 2 | 7 x 2 3/4 long | about 2 ft |
| Poplar 1x2 (3/4 x 1 1/2) | D2 post, and cleats behind the hole | 39 + about 9 ft of cleat | two 8 ft |
| Poplar 2x2, ripped to 1 x 1 1/2 | cab cleat, partition cleat, batten, hook pad | 20 7/8 + 19 7/8 + 11 3/4 + 3 | one 8 ft |
| 1 1/2 steel corner braces | ribs to the 80/20 bars (2 per rib), post top and foot | | about 12 |
| Drop-in T-nuts and bolts for your 80/20 | the brace at each bar (a 1 in profile is usually 10 series, 1/4-20: check yours) | | about 10 |
| #8 wood screws, 1 1/4 and 2 | everything else | | a box each |
| Titebond III, PL Premium | every wood joint; PL for the ceiling ribs on the fiberglass | | |