Systems / Outside / Slide-out deck
Slide-out deck
Under the door: a fold-out step, or a two-leaf deck from box to box.
Stowed, half deck (the quick landing with steps), or the full deck: how it stacks, the steps, the legs, a clean face.
The idea
Three states. Stowed: one clean black face under the passenger door, flush with the box doors. Half deck: slide leaf A out with leaf B folded on it, and B's back is a 51 x 22 landing 4 1/2 in below the door; drop the GlowStep and step down. The quick, everyday way in and out, no legs. Full deck: flip B back over the tire onto a third rail, drop the legs: one long deck from box to box, the same steps off its edge.
Both leaves are the same 1 1/8 in marine plywood, epoxy sealed, flat on both faces, with marine foam decking on top. The steps are always attached, riding out with A. The slides sit beside and under the leaves on drop brackets from the body crossmembers (plates in their slots, no drilling), so nothing crosses the deck surface. The buttons below take it through all three states.
How it stacks, stowed
Cut across the truck at a crossmember, looking forward. Top down: the crossmember; 1/4 in of air; leaf B folded face down on leaf A, both 1 1/8 marine ply; A's legs folded flat under it at its ends; A's black skirt down to the box bottoms, with the GlowStep stored in its well. The slides are at A's ends, on drop brackets from the crossmembers.
- floor planks
- body crossmember, 2 in channel: clamp plates in its slot
- leaf B folded face down: 1 1/8 marine ply
- leaf A, 1 1/8 marine ply
- face band, 1/8 black, flush with the top
- Ford frame rail and its lip: nothing bolts here
- slides at A's ends (beyond), on drop brackets
- A's legs, folded flat across its underside (at its ends, beyond)
- skirt on A, to the box bottoms; the step well cut out of it
- the GlowStep, stored and latched in its frame (beyond, in the well)
- front box (beyond): the same face plane and bottom
Half deck: the quick way in and out
Pull the handle and A slides out 22 in on R1 and R2, B riding folded on it. B's back is the landing, 4 1/2 in below the door. Flip the GlowStep's lever and it drops to the ground: three 7 1/2 in steps on its own landing gear, which props A's edge right where you step off. No legs.
- floor planks
- body crossmember, 2 in channel: clamp plates in its slot
- leaf B folded face down: 1 1/8 marine ply, its back the landing
- leaf A, 1 1/8 marine ply
- face band, 1/8 black, flush with the top
- Ford frame rail and its lip: nothing bolts here
- slides at A's ends (beyond), on drop brackets
- skirt on A, to the box bottoms; the step well cut out of it
- front box (beyond): the same face plane and bottom
- GlowStep down: 3 treads, 7 1/2 rise, landing gear on the ground
- landing gear: props A's edge, adjusts to the ground
Full deck
From the half deck: pull R3 out, flip B back over the tire onto it, pin B's two legs in, drop A's two. One long deck from box to box, about 8 ft 7, 5 5/8 in below the door; the same steps off its edge.
- floor planks
- body crossmember, 2 in channel: clamp plates in its slot
- leaf A, 1 1/8 marine ply, the full deck's surface
- face band, 1/8 black, flush with the top
- Ford frame rail and its lip: nothing bolts here
- slides at A's ends (beyond), on drop brackets
- skirt on A, to the box bottoms; the step well cut out of it
- A's legs at its corners (beyond), down for the full deck
- front box (beyond): the same face plane and bottom
- GlowStep down: 3 treads, 7 1/2 rise, landing gear on the ground
- landing gear: props A's edge, adjusts to the ground
Stowed, from outside
Each leaf has a black band on its outer edge, flush with its top. Folded, B's sits on A's: one 2 1/4 in black line in the plane of the box doors. Under it A's black skirt runs down to the box bottoms, with the folded steps in their open well under the door. Everything else is behind that face.
The legs
A's two, at its outer corners: a 1 1/4 in round tube on a hinge, a 1 1/8 tube telescoping inside it, a ball-lock pin to the nearest inch, a levelling foot. A folding brace clicks straight to hold it vertical; folded, it swings inward flat under A. B's two are the same tubes pinned into sockets under B, for the full deck only.
- folded: retracted, swung inward flat under A, in a spring clip
- hinge: angle cheeks and a 5/16 bolt, into inserts in the ply
- locking brace: clicks straight, push the knee to fold
- outer tube, 1 1/4 x 0.058, 18 in
- ball-lock pin: length to the nearest inch
- inner tube, 1 1/8 x 0.058: a hole every inch
- levelling foot: the last inch and the slope