Shower
wedi floor and walls, the swing door to the kitchen, the slider to the cab, microcement.
The shower and both doors in one model. The same 3D follows you through all four phases.
The whole shower
Both doors, the fan, the pan and every board. Turn it, open the doors, drag the build back to the bare corner, or colour it by what's ordered. Tap a part for where it comes from and where it's built.
See it finished: the renders (Blender, from this model), the door on the kitchen photo, the kitchen door in 3D, the cab slider in 3D.
TBDready to orderorderedarrivedbuilthave it
Cut through
Show
What's in it 79 parts
Floor and drain
ordered
wedi Fundo Primo base, 36 x 72, center drain, US9100006
stockordered
Click and Seal 2 in drain (with the base)
stockordered
Stainless drain cover, US1000057
stockready to order
D1 curb, white oak core under 1/4 wedi, site-built
have itready to order
wedi PRO-SET modified thinset, 25 lb
stockready to order
2 in Sch 40 PVC, 2 x 1 1/2 reducer, primer and cement
stockready to order
HepvO waterless valve, 1 1/2 in, 5717
stockready to order
5 in hole saw and arbor
stockready to order
Thinset trowels, mixing paddle, bucket
stockWalls and waterproofing
have it
Driver-side box over the PEX: two 1/2 ply walls and a 1/2 ply top, the lower wall stands on it
have ithave it
Upper band skin, 1/4 Baltic birch
have itTBD
Upper band ribs, 3/4 plywood, scribed
cut from stockhave it
Cable box and D2 curb, the whole cab wall: 2x4 blocks, a 1/2 ply top, wedi on its face and top
have itready to order
Smooth conduit, pull string, a spare empty conduit
stockready to order
Driver wall above the shelf: two corner cleats and a batten, poplar 2x2 ripped to 1 x 1 1/2
cut from stockhave it
Lower driver wall: 1/2 ply ribs and shelf plate, 4 in out
have itready to order
Fixture blocks, 3/4 okoume
cut from stockready to order
wedi building panel 1/4 in, 48 x 60 (US8000013)
stockordered
wedi building panel 1/2 in, 3 x 5: the six in the kit
stockready to order
Ply backing under the wedi, 6 mm okoume BS-1088, 4 x 8
cut from stockready to order
Modified thinset for the boards, 25 lb (ANSI A118.15)
stockready to order
1/4 x 1/4 square-notch trowel
stockready to order
#8 x 3/4 stainless screws (cab wall, partition, wardrobe: nothing may come through)
stockTBD
wedi tabless washers, 100
stockTBD
Cab bolt access: printed sleeve and O-ring cap for each box-to-cab bolt
printedready to order
Construction adhesive for the ply backing (PL Premium)
stockordered
wedi fastener kit, 100 screws + washers
stockordered
wedi Joint Sealant, 10.5 oz
stockready to order
Stainless #8 x 1 1/4 flat-head screws
stockTBD
Microcement: CimentART Aqua shower system
stockCurved ceiling
TBD
Ceiling profile ribs and battens
cut from stockready to order
Ceiling skins, 1/8 Baltic birch or 3 mm okoume, x2
stockready to order
Shower lights: two recessed 12 V pucks, wet-rated (IP67), white and red
stockExtract fan
ordered
VETUS FAN12 extract fan, 12 V, two speed
stockordered
VETUS SCIROCCO cowl, 316 stainless
stockTBD
3 in PVC DWV sleeve and two blocking rings
stockready to order
D1 air slots, routed through the door
cut from stockTBD
Fan control: off / low / high and a run-on timer
stockready to order
Black fan cover, printed: floating disc and ring
printedShower fixture
TBD
Shower mixing valve (which one: not chosen)
stockready to order
PEX fittings to the valve: crimp or expansion, no push-fits
stockready to order
PEX pressure test gauge and caps
stockTBD
Mixer drilling template
printedD1, kitchen door
ready to order
D1 hinge upright, poplar 1 1/4 x 1 1/2, 72
cut from stockready to order
D1 strike jamb, poplar 1 1/4 x 1 1/2, notched
cut from stockready to order
D1 head, poplar 1 1/4 x 1 1/2, notched
cut from stockhave it
D1 infill above the head, 1/2 ply
have itready to order
D1 apron, poplar 1x4, kitchen side
cut from stockhave it
D1 leaf, 12 mm Baltic birch
have itready to order
D1 mirror, kitchen face: 1/8 safety-backed glass, frameless, polished edges
stockordered
TACO Marine 304 stainless piano hinge, 1 1/2 x 72, 0.037 (H14-0112A72-1)
stockready to order
D1 catch lip, 1 x 1/8 black anodized aluminum bar on the door's shower face
stockTBD
D1 latch, worked from both faces, and its keeper
stockready to order
D1 corner magnets: cup magnets and steel strikes
stockready to order
D1 frame screws and glue
stockTBD
D1 latch backing plate
SendCutSendTBD
Hinge drilling jig
printedTBD
D1 open-stop bumper
printedTBD
Door seals, EPDM bulb (D1 and D2)
stockD2, cab slider
have it
D2 fill strip behind the wardrobe, 1/2 ply
have ithave it
D2 floor cleat, a 1 1/2 strip of 1/2 Baltic birch, plus temporary battens
have itready to order
D2 infill, the doorway's driver edge, 1/2 ply
cut from stockready to order
Husky PC100/200 hangers, clip stops, BG1 guide
stockready to order
Husky track, aluminium, 6 ft (cut to 41 1/2)
stockready to order
D2 leaf, 12 mm Baltic birch (the D1 sheet offcut), hardwood top rail
have itTBD
D2 track cover, bent aluminium
SendCutSendready to order
D2 bracket bolts: 1/4-20 stainless, fender washers and nylocks on the cab side, sleeves through the wedi
stockTBD
D2 track bracket: a bent stainless angle the track hangs from
SendCutSendTBD
D2 BG1 guide bracket
SendCutSendhave it
D2 parked keeper pad, 3/4 ply
have itTBD
D2 travel latches, closed and parked
printedready to order
D2 flush pulls
printedLaundry cubby
ready to order
Laundry cubby side panel, 1/2 ply scribed to the ceiling
cut from stockhave it
Laundry hamper flap with vent slots, hinged at the bottom, 1/2 Baltic birch
have itready to order
Mesh hamper liner, a tray that pulls out
stockready to order
1/2 in hardwood dowel, 36 in
stockready to order
U-cradles for the liner dowel
printedready to order
Piano hinge, 30 in, for the flap
stockready to order